Current Location：Home > News > Company News >
Proper maintenance can prolong the life of the LCD screen splicing
Date：2017/12/5 16:08:23 View：2282
Other Display LCD splicing screen has unmatched performance and stability, it can support 7 * 24 hours a day, life in most LCD splicing screen around 60,000 hours, but in the long service life, the use of the process is generally very less failure, and the reason it fails is usually not done because of long maintenance, so that the basic components of its internal aging will lead to a serious failure. So routine maintenance work on the life of the LCD screen splicing plays an essential role.
Shenzhen Nanor Technology senior engineer said, generally speaking, have not done for a long time and lead to failure of maintenance LCD screen splicing occurs are some of the more cause for headlines problem, but the site of failure is the main part of the system appears . If the problem is serious, then the maintenance costs will far outweigh the cost of routine maintenance, for economic reasons, it will undoubtedly add a lot of cost.
Therefore, in daily use in LCD screen splicing must develop good habits following:
1. Do not use your fingers pointing to the screen (especially sharp nails)
LCD splicing screen is very delicate, relatively poor ability to fight, pointing it easy to increase the bad, which is why some users for some time will find dead pixels more important reason. This situation can not be reversed and redress. Also, do not open under power LCD splicing screen cover, even after a power outage, retained transient voltage is pricey, CFL backlight assembly still about 1000V high voltage transformer with.
Splicing screen
2, not bad in a wet environment (to maintain a dry environment)
LCD screen splicing interior design is very precise, if moist environment can cause a short circuit is easily oxidized corrosion phenomena, giving users a huge economic losses. Therefore, to try to keep the LCD screen splicing dry environment. If you find the screen surface with a soft damp cloth to gently wipe, and then to turn on the power to work. If moisture has entered the LCD screen splicing inside, it must be on the LCD screen splicing good ventilation or warm place, let the water evaporate. If the situation is more severe, the average user can ask professionals to help solve. Never in the absence of humidity to let the LCD screen splicing powered job, otherwise it will lead to liquid crystal electrode corrosion, which causes permanent damage to the LCD screen splicing.
3. Do not pour cleaner directly on the screen (LCD video screen to do routine maintenance)
LCD splicing screen with a long time, likely to have some of the dust and dirt, cleaning LCD screen splicing screen is inevitable. When we want to clean up with the right cleaning method: Use a soft, non-fibrous material cotton, lens tissue or a soft cloth dampened with a little glass cleaner, etc., gently wipe dust or dirt on the screen. Therefore, in daily use LCD screen splicing time to pay attention to maintenance work, normal life can note that can extend the life of mosaic screens.
Related News
